Spectracom PresenTense Network Time Management Software
                                  LAN Time Analyzer Program s-e-NTP-lta-01
                                         (30-day Trial Version)
		               

Installation Instructions and Summary of Operation:

   The "LAN Time Analyzer" folder on this CD contains a file called lantimedemo.exe.  Open the 
   folder and double-click on this file. Click "Run" to install the selected program on the PC. 
   The Setup Wizard will walk you through the installation process.

   Once the LAN Time Analyzer program has been installed, you can open this program by selecting 
   "LAN Time Analyzer" from the Start/Programs menu. After opening the program, you will need to 
   configure the desired reference time server against which to compare, the alarm actions and 
   settings, and the names or IP address of one PC on the network to be monitored (The 30-day 
   trial version of the LAN Time Analyzer program will only allow one PC on the network to be 
   monitored).  

     1) To set the reference time server with which to compare the Windows client, click on
        Settings/True Time Server and enter the name or IP address of the desired reference.
 
     2) To set the alarm thresholds and the actions that are to occur automatically if the PC 
        exceeds the desired threshold, click on Advanced/Alarm.

        Note: For any Windows PC to be monitored by this program, it must be running either PresenTense
              Client or Server software.  If you enter the name or IP address of a PC that is not 
              currently running either of these two programs (or if the PC is not currently on the 
              network so it cannot be reached), "No reply" will be displayed in all but the first value 
              box.

    3) To automatically select or update the list of the Windows client to be monitored by this program:
        Click on "Advanced" on the top of the screen and then select "Scan" from the drop-down list. 
        Then, in the"Scan network for clients" menu, enter the desired start and stop IP addresses for 
        the program to look for clients.  Press "Scan" and the program will then search for all PCs in 
        the search range that are running either PresenTense Server or PresenTense Client software.  

        Note: if a client PC does not have the PresenTense Client or Server program loaded when the 
              network is scanned,it will not be added to the list of clients to be monitored.  
              Install the client or Server software and then either rescan the network or manually 
              add it to the list using the next step below.
       
     4) To manually enter a new client to the list of PCs to be monitored by this program:
        Select Client/New from the menu and then enter the name or IP address for each client.  
        The PC will then be added to the list of PCs to be monitored.

     5) To manually compare the time of the Windows clients to the "True Time Server" select 
        Client/Fetch Remote Times. THe clients will time synchronized and then compared to the 
        time of the "True Time Server"and the time difference displayed next to each client.  If 
        an error exceeds the user-defined value configured in the Alarms settings, an alarm will 
        be generated.  The program can also run automatically at the rate selected in 
        Settings/Auto Fetch.