Skydel 20.2 Release Notes

Release 20.2.5

Bug fixed:
  • When output type is "IQ-File", "Gaussian Noise" is effectively added to GNSS signals and stored in the IQ-File.
  • Fixed propagation delay not being applied properly when resampling "IQ-File".


Release 20.2.4

New Features:
  • All "advanced jammers" signal types are now supported in Wavefront simulations.

Release 20.2.3

New Features:
  • Advanced jammer type "IQ-File" can now use IQ-Files with a lower sample rate.
    IQ-File will be upsampled in real-time during the simulation.
Bug fixed:
  • Fixed bits mistmatch in M-Code plugin when having both L1 and L2.
  • Fixed L1C signal power offset between Pilot and Data components.
    Default power offset of GPS L1C is now 1.5dB higher than GPS L1 C/A.
  • Fixed Earth masking of dynamic transmitter of advanced jammers.

Release 20.2.2

Changes:
  • Default DTA-2115B card ordering based on PCIe enumeration instead of S/N.

Release 20.2.1

New Features:
  • Added more feedback on wavefront calibration.
  • Added Windows compatibility for the advanced spoofing feature.
  • Increased the maximum power that can be set for advanced jamming signal.

Bugs fixed:

  • Missing Gaussian Noise on GNSS outputs.
  • Fixed RemoveAllIntTx command execution.
  • Fixed Interference output selection with signal erroneous behaviour.
  • Fixed elapsed time not resetting in UI on stop.
Remote API version 28:
  • Added Commands:
    • [Set/Is]IntTxIgnoreRxAntennaGainPattern: Set whether a dynamic transmitter should ignore the receiver's antenna gain pattern.
    • [Set/Is]IntTxIgnoreRxAntennaPhasePattern: Set whether a dynamic transmitter should ignore the receiver's antenna phase pattern.
    • [Set/Is]SpoofTxIgnoreRxAntennaGainPattern: Set whether a spoofer should ignore the receiver's antenna gain pattern.
    • [Set/Is]SpoofTxIgnoreRxAntennaPhasePattern: Set whether a spoofer should ignore the receiver's antenna phase pattern.
    • SetIntTxIgnoreRxAntennaPatterns: Set whether a dynamic transmitter should ignore the vehicle's antenna patterns (gain and phase).
    • SetSpoofTxIgnoreRxAntennaPatterns: Set whether a spoofer should ignore the receiver's antenna patterns (gain and phase).
  • Modified Commands:
    • SetIntTxIgnoreVehicleAntennaPattern is deprecated.
      Use SetIntTxIgnoreRxAntennaPatterns instead.
  • Removed Commands:
    • SetSpoofTxIgnoreVehicleAntennaPattern was replaced by
      SetSpoofTxIgnoreRxAntennaPatterns.

Release 20.2.0

New Features:
  • Added Simulation of "Spoofers" (needs additional license)
  • Advanced Jammers signal can now be assigned to different groups to simplify definition of a multi-band jammer

If you need access to the clients' site to download the binaries for this release, please contact us.

View All Skydel Releases